Type EM-TRF-USV

For the connection of EASYLAB to the 230 V mains and for uninterruptible power supply

 

Expansion module for the direct connection of EASYLAB controllers Type TCU3 and adapter modules Type TAM to the 230 V mains, including uninterruptible power supply

  • Double-stack terminal blocks for 230 V supply voltage connection
  • Electric plug connection to the main PCB
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Uninterruptible power supply for the connected modules
  • Integral battery charging electronics with charge status indicator
  • Power failure is signalled to the EASYLAB control panels
  • Controller action in case of a power failure can be defined
small_tab1_Serie EM-TRF-USV
  • Application
  • Description

Application

  • Expansion module Type EM-TRF-USV for the EASYLAB system
  • For the connection of EASYLAB base components (controller TCU3 or adapter module TAM) to the 230 V AC supply voltage (mains)
  • Power supply for the base component and the connected modules
  • Battery pack ensures uninterrupted power supply even in case of a mains power failure
  • Control and/or alarm signalling even in case of a power failure
  • Factory mounted or for retrofitting into the EASYLAB base component casing

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Parts and characteristics

  • Mains transformer 230 V AC (primary), 24 V AC (secondary)
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • PCB plug connector to connect the module to the EASYLAB main PCB

Useful additions

  • EasyConnect: Configuration software for the commissioning and diagnosis of EASYLAB components

Construction features

  • PCB dimensions and fixing points correspond to the EASYLAB main PCB and the casing
  • Fixing with screws
  • Double-stack terminal blocks for simply 230 V supply voltage connection

Información técnica

  • Function
  • Technical data
  • Specification text
  • Order code
em-trf-usv
em-trf-usv

 

Expansion module for the EASYLAB base component (controller TCU3 or adapter module TAM) that can be directly connected to a 230 V AC supply voltage. The expansion module includes a transformer whose secondary voltage (24 V) is equal to the supply voltage for the controller and the expansion modules connected to it.

Uninterruptible power supply (UPS) by means of a battery pack that maintains defined functions in case of a power failure.

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Technical data

  • Supply voltage: 230 V AC ± 10 %, 50/60 Hz
  • Power consumption: up to 40 VA for a controller with all expansion modules; up to 35 VA for a fume cupboard controller with control panel; up to 33 VA for a room controller with control panel; up to 29 VA for a room controller without control panel; up to 9 VA for an EASYLAB adapter module TAM
  • Operation in case of a power failure: One controller (TCU3 or TAM) with control panel, standard operation will be maintained for approx. 4.5 h, defined damper blade positions and power failure signalling will be maintained for approx. 6 h
  • Battery pack charging: 1500 mA
  • Battery life: up to 4 years
  • Double-stack terminal blocks: Cable cross-section up to 2.5 mm²
  • Protection level: IP 20
em-trf-usv

Descargas

Compartir

Recomendar

Recomendar el contenido de esta página, mandar por mail.

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Compartir

Gracias por su recomendación!

Su recomendación ha sido enviada y llegará a su destino en breve.

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +54 (11) 4233 5676

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +54 (11) 4233 5676

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +54 (11) 4233 5676

Archivo adjunto (Max. 10MB)

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +54 (11) 4233 5676