Módulos de expansión

layer

Type EM-BAC-MOD-01

 

Expansion module for EASYLAB fume cupboard controllers, room controllers, extract air controllers, supply air controllers, and adapter modules, for the integration of rooms or individual volume flow controllers with the central BMS

  • Switching between BACnet MS/TP and Modbus RTU
  • BACnet Standardised Device Profile (Annex L)
  • Modbus interface with individual data registers
  • Native BACnet interface by integrating the expansion module with EASYLAB components
  • Easy retrofitting
  • Double-stack terminal blocks for the EIA-485 bus
  • Equipment address and data transfer parameters can be defined


Interface to central BMS

  • When used on a controller with active room management function (RMF) the module provides also data points for the entire room, e.g. for total volume flows or consolidated alarms
  • When used on a single controller: data points for volume flow rate, alarm, damper blade position, or others
  • Centralised operating mode default setting, e.g. night-time operation

leer más

layer

Type EM-LON

 

Expansion module for EASYLAB fume cupboard controllers, room controllers, extract air controllers, supply air controllers, and adapter modules, for the integration of rooms or individual volume flow controllers with the central BMS

  • LonWorks FTT-10A interface
  • Communication only using standard network variables (SNVT)
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Easy retrofitting
  • Double-stack terminal blocks for the LonWorks network
  • Service pin push button and corresponding indicator light


Interface to central BMS

  • When used on a controller with active room management function (RMF) the module provides also data points for the entire room, e.g. for total volume flows or consolidated alarms
  • When used on a single controller: data points for volume flow rate, alarm, damper blade position, or others
  • Centralised operating mode default setting, e.g. night-time operation

leer más

layer

Type EM-TRF

 

Expansion module for the direct connection of EASYLAB controllers Type TCU3 and adapter modules Type TAM to the 230 V mains

  • Double-stack terminal blocks for 230 V supply voltage connection
  • Electric plug connection to the main PCB
  • The expansion module is fitted into the casing with the EASYLAB base component

leer más

layer

Type EM-LIGHT

 

Expansion module with a wired socket for the connection of lighting and for switching the lighting on/off using the control panel

  • Lighting can be switched on/off using an EASYLAB control panel
  • Socket for the connection of fume cupboard or room lighting (230 V)
  • Only in connection with expansion module EM-TRF or EM-TRF-USV
  • Socket on the outside of the controller casing
  • Plug-in connection for the lighting, e.g. fume cupboard lighting

leer más

layer

Type EM-TRF-USV

 

Expansion module for the direct connection of EASYLAB controllers Type TCU3 and adapter modules Type TAM to the 230 V mains, including uninterruptible power supply

  • Double-stack terminal blocks for 230 V supply voltage connection
  • Electric plug connection to the main PCB
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Uninterruptible power supply for the connected modules
  • Integral battery charging electronics with charge status indicator
  • Power failure is signalled to the EASYLAB control panels
  • Controller action in case of a power failure can be defined

leer más

layer

Type EM-AUTOZERO

 

Expansion module for EASYLAB controllers that offers automatic zero point correction for long-term stable volume flow rate measurement and reduced maintenance

  • Particularly recommended for the volume flow or differential pressure measurement in sensitive areas
  • EASYLAB controller automatically identifies and uses the expansion module
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Easy retrofitting
  • No additional configuration effort

leer más

Compartir

Recomendar

Recomendar el contenido de esta página, mandar por mail.

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Compartir

Gracias por su recomendación!

Su recomendación ha sido enviada y llegará a su destino en breve.

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +54 (11) 4233 5676

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +54 (11) 4233 5676

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +54 (11) 4233 5676

Archivo adjunto (Max. 10MB)

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +54 (11) 4233 5676