Type SMART BEAM

Multi-service active chilled beam with two-way air discharge and horizontal heat exchanger

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for freely suspended installation; additional functions or services (e.g. lighting, loudspeakers, sprinklers, smoke detectors, or PIR sensors) can be integrated

Preferably for room heights up to 4.20 m
High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
High comfort levels as a result of low airflow velocities in the occupied zone
Unit consists of three parts: wall end, active section, and front end

Optional equipment and accessories

Control package
3 different front ends
Various services, e.g. lighting, sprinklers, smoke detectors, PIR sensors, and loudspeakers
Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Application

Active chilled beams of Type DID-SB (SMART BEAM) for freely suspended installation, preferably for room heights up to 4.20 m
Project-specific integration of functions or services such as lighting, loudspeakers, sprinklers, smoke detectors, or PIR sensors
2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
Energy-efficient solution since water is used as a medium for heating and cooling
Integral strip light fittings use innovative microprism optics to provide uniform illumination of rooms
Each section can be individually designed

Special characteristics

Freely suspended active chilled beam with choice of different face plate perforations
Heat exchanger as 2-pipe or 4-pipe system
Wide range of additional services such as lighting, sprinklers, loudspeakers and sensors (accessories)
Water connection at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal

Wall end

Cover for air and water connections at the side facing the wall
Connection of project-specific services

Active section

Air discharge and heat exchanger
Integration of different functions, e.g. acoustic fleece, lighting or sensors

Front end

Available in three designs
Integration of project-specific functions, e.g. loudspeakers

Construction

Powder-coated RAL 9010, pure white, gloss level 50 %
P1: Powder-coated in any other RAL colour, gloss level 70 %
P1: Powder-coated RAL 9006, white aluminium, gloss level 30 %

Accessories

Sprinkler
Smoke detector
PIR sensor
Loudspeaker
Indirect and/or direct lighting

Useful additions

Connecting hoses
Control equipment consisting of a control panel including a controller with integral room temperature sensor; valves and valve actuators; and compression couplers (no lighting control)

Construction features

Spigot is suitable for circular ducts to EN 1506 or EN 13180
Unit consists of three parts: wall end, active section, and front end
Four suspension points for on-site installation (by others)
Four nozzle variants to optimise induction based on demand
Perforated front plate (choice of different designs) with acoustic fleece at the rear

Materials and surfaces

Wall end as well as active section with front plate, nozzle plate and cross bars are made of galvanised sheet steel
Front end made of aluminium or galvanised sheet steel
Heat exchanger with copper tubes and aluminium fins
Exposed surfaces at the front are powder-coated pure white (RAL 9010) or in any other RAL colour
Exposed surfaces at the rear, including nozzle box, in RAL 9006, white aluminium
Heat exchanger also available in RAL 9006, white aluminium

Información técnica

Functional description

Active chilled beams provide centrally conditioned primary air (fresh air) to the room and use heat exchangers for additional cooling and/or heating.

The primary air is discharged through nozzles (four variants are available).

As a result of this, secondary air (room air) is induced and passes through the heat exchanger.

Primary and secondary air mix and are then supplied to the room horizontally.

Active chilled beams of Type DID-SB, with two-way air discharge and high thermal output, providing high thermal comfort levels; for visible installation about 300 mm below the ceiling slab in rooms without a suspended ceiling.

Preferably for room heights up to 4.20 m.

The units consist of a casing with suspension points, a spigot, non-combustible nozzles, and a horizontal heat exchanger.

Nozzles in four sizes to optimise induction based on demand.