BE-LCD-01

Control panels with adjustable status display for the EASYLAB system, used to display and control the most critical aerodynamic and safety-related functions of a fume cupboard or a room. The control panel includes a backlit 40-character display, function buttons, a three-colour status display, an alarm sounder, and a service socket.

Mounting on side frame or wall

Scope of functions

• Configurable, optical and acoustic signalling of the safety-related functions
• Text displays in several languages
• Large three-colour status display; green, yellow or red with text LOW or HIGH (red: either blinking or permanent)
• Continuous self monitoring of the communication between controller and control panel
• Integral service socket for configuration and diagnosis
• Wireless communication with Bluetooth module BlueCon
• Two control panels can be connected simultaneously to a controller

Configurable functions

• Available (configured) function buttons are visible
• Unavailable function buttons are not visible

Control panel for fume cupboard controller

Function buttons that can be activated

• Warning display that 'maximum operational sash opening' has been exceeded
• Increased volume flow
• Reduced volume flow
• Shut-off mode
• Automatic sash device
• Fume cupboard lighting
• Manual mode (override operating mode default setting)

Text display

• Service is due (option)
• Power supply failure (EASYLAB controller with expansion module EM-TRF-USV)
• Smoke extract is active
• Extract air scrubber is active
• Device faults (various codes)
• Display of face velocity actual value at fume cupboards (option for fume cupboards with face velocity transducer)

Control panel for room controllers

Scope of functions

• Configurable, optical and acoustic signalling of the safety-related functions of a room with up to 24 EASYLAB controllers
• Room pressure monitoring
• Monitoring of the total room extract air (excess will be signalled)
• Monitoring of the minimum room extract air (shortfall will be signalled)
• Consolidated alarm for the room

Function buttons that can be activated

• Increased volume flow
• Reduced volume flow
• Shut-off mode
• Manual mode (override room operating mode default setting)
• Control input signal for an individually usable relay changeover contact, e.g. for lighting
• Control input signal for sun protection/blinds (to be provided by others)

The operating mode default setting applies to all controllers in a room.

Text display

• Room operating mode
• Total room extract air setpoint value and actual value (option)
• Room pressure setpoint value and actual value (option)
• System and device faults
• Power supply failure (EASYLAB controller with expansion module EM-TRF-USV)

Special characteristics

• Large three-colour status display
• Push buttons and functions can be configured individually
• Easy to use – available function buttons are visible, unavailable function buttons are not visible
• Excellent operating reliability as a result of continuous self monitoring of the communication between controller and control panel
• Pluggable adapter which can provide four different viewing angles
• Mounting on side frame or wall

Materials and surfaces

• Casing in ABS plastic
• Casing: pearl light grey (RAL 9022)
• Front plastic: anthracite grey (RAL 7016)

Technical data

• Supply voltage: 24 V DC from the controller TCU3 or adapter module TAM
• Plug-in connection cable, 5 m long, extendable to 40 m (standard network patch cable SF-UTP)
• Protection level: IP 20